One-Stop
Testing Solutions

🌡️ Climatic Simulations

Advanced climatic simulation testing to evaluate product performance under real-world temperature, humidity, and corrosion conditions. Our walk-in and bench-top environmental chambers simulate conditions from -70°C to +200°C with programmable humidity control.

Tests include: Temperature cycling, thermal shock, damp heat (steady state & cyclic), dry heat, cold testing, rapid temperature change, altitude simulation, solar radiation, salt spray/fog corrosion testing, fungus resistance, UV exposure, combined temperature-humidity-vibration.

Standards: MIL-STD-810, IEC 60068 series, JSS 55555, RTCA DO-160, IS/EN 60529, JEDEC standards.

📳 Dynamics & Vibration Testing

Products must pass rigorous dynamics testing to ensure readiness for production and field deployment. Our vibration and shock testing labs confirm structural strength and endurance during transport, operation, and extreme conditions.

Tests include: Random vibration, sine vibration (sweep & dwell), mechanical shock, bump testing, drop testing, half-sine & sawtooth shock pulses, modal analysis, resonance search & dwell, endurance testing, fatigue analysis, transportation simulation.

Standards: MIL-STD-810G/H, IEC 60068-2-6/27/29/64, RTCA DO-160, MIL-STD-883, MIL-STD-202, ISTA, ASTM D4169, EN 61373 (Railway).

💧 Contamination & Ingress Testing

Comprehensive contamination and ingress testing determines how fluids, dust, water, and chemical substances affect materials, coatings, and system components — ensuring long-term safety and product validation in demanding environments.

Tests include: Ingress Protection (IP) testing (IP20 to IP69K) for dust and water, fluid susceptibility/contamination testing (acidic, neutral, base solutions), rain testing, immersion testing, drip testing, hose-directed water, pressurized water jet, steam cleaning simulation.

Standards: IEC/IS/EN 60529, JSS 55555, MIL-STD-810, RTCA DO-160, NEMA 250, MIL-STD-202, automotive OEM specs.

🔌 Electrical Safety Testing

Ensure your electronic and electrical products meet national and international safety requirements before market approval. Our electrical safety lab conducts comprehensive safety evaluations to prevent electrical hazards and ensure compliance.

Tests include: Dielectric withstand (Hi-Pot), insulation resistance, earth/ground continuity, leakage current, touch current, power input measurement, abnormal operation, heating tests, electric strength, creepage & clearance verification.

Standards: IEC 60950, IEC 62368-1, IEC 61010, IEC 60065, IEC 60335, UL/EN standards, BIS safety standards, CE marking requirements.

📡 EMC/EMI Testing

Electromagnetic Compatibility (EMC) and Electromagnetic Interference (EMI) testing ensures your products neither emit excessive electromagnetic energy nor are susceptible to interference from external sources. Our shielded EMC test chambers provide accurate pre-compliance and full compliance testing.

Tests include: Conducted emissions, radiated emissions, conducted susceptibility/immunity, radiated susceptibility/immunity, ESD (electrostatic discharge), surge, EFT (electrical fast transient), power frequency magnetic field, voltage dips & interruptions, harmonics, flicker.

Standards: IEC 61000 series, CISPR 11/22/32/35, MIL-STD-461G, EN 55032/55035, FCC Part 15, RTCA DO-160 Section 20-22, IS 13252, automotive EMC (CISPR 25, ISO 11452).

✈️ Aircraft Electrical Power Testing

Aircraft electronics and electrically powered avionics equipment must be tested under extreme power conditions to ensure reliable operation once in the air. Our engineers simulate aircraft power bus conditions including normal, abnormal, and emergency power scenarios.

Tests include: AC & DC power input testing, voltage spike, surge & transient testing, power interrupt testing, frequency variation, emergency bus transfer, power factor measurement, inrush current, conducted emissions on power lines.

Standards: MIL-STD-704 (all revisions A–F), RTCA DO-160 Section 16 (Power Input), MIL-STD-461G CE101/CE102, DEF STAN 61-5.

🔗 Optical Fiber Cable Testing

Comprehensive fiber-optic cable validation to confirm network quality, signal integrity, and durability under thermal, mechanical, and environmental stress conditions.

Tests include: Optical attenuation/loss measurement, connector endface inspection, tensile strength, crush resistance, impact, bend testing, temperature cycling, water penetration, cable strippability, optical time domain reflectometry (OTDR).

Standards: IEC 60794 series, IS 15885, TEC GR specifications, ITU-T G.652/G.655/G.657, IEC 61300 connector standards.

📞 Telecom Interface Testing

Forerunner in telecom equipment testing, design reviews, and compliance testing throughout your project lifecycle. Envitest-style comprehensive telecom product validation covering MTCTE (Mandatory Testing and Certification of Telecom Equipment) requirements.

Tests include: TEC Essential Requirement (ER) testing for routers, switches, modems, Wi-Fi access points, CPE, WLAN controllers, base stations, mobile stations, IPv4/IPv6 switches, fiber components, combiners, connectors, patch panels, amplifiers.

Standards: TEC ER (Telecommunication Engineering Centre), MTCTE certification, ITU-T standards, 3GPP, IEEE 802.11, Bluetooth SIG specifications.

🔧 Electrical Connectors & Cable Testing

Reliable testing solutions for electrical connectors — evaluating electrical conductivity, signal integrity, mechanical durability, mating cycle endurance, and environmental resilience for connectors used across electronics, automotive, aerospace, and telecom.

Tests include: Contact resistance, insulation resistance, dielectric withstand, mating/unmating force, durability (insertion/extraction cycles), vibration, thermal shock, salt spray, humidity exposure, wire pull-out force, current-carrying capacity.

Standards: MIL-DTL-38999, MIL-DTL-26482, IEC 60603, IEC 61076, MIL-STD-1344, EIA-364, JSS 55555 connector tests.

🔄 Reliability & Life Testing

Accelerated life testing and reliability assessment to identify design weaknesses early and ensure your products meet required MTBF (Mean Time Between Failures) targets before production.

Tests include: HALT (Highly Accelerated Life Testing), HASS (Highly Accelerated Stress Screening), ESS (Environmental Stress Screening), burn-in testing, accelerated aging, MTBF/MTTF calculation per MIL-HDBK-217, combined environment reliability testing.

Standards: MIL-HDBK-217, MIL-STD-781, Telcordia SR-332, IEC 61709, JEDEC JESD22 series, MIL-STD-883.

🔍 Inspection & Engineering Services

End-to-end product lifecycle support — from design review and pre-production inspection to in-process quality monitoring and final product validation. Our inspection team ensures compliance with national and international standards at every stage.

Services include: Pre-production inspection, in-process quality inspection, final random inspection, first article inspection (FAI), material certification review, test witness/supervision, design review support, custom jig & fixture design.

Standards: ISO 9001, ISO 17025, AS9100, IATF 16949, MIL-STD inspection procedures.

⚙️ Customized & Special Tests

Tailored testing programs designed for unique product requirements that go beyond standard specifications. Our engineering team collaborates with you to develop custom test protocols combining environmental, dynamic, electrical, and reliability testing into integrated validation programs.

Examples include: Combined temperature-humidity-vibration testing, custom duty cycle simulation, product-specific accelerated stress testing, field failure replication, competitive benchmarking, qualification test plans per customer specifications.

Approach: Requirement analysis → test plan design → fixture development → test execution → comprehensive reporting with failure analysis.

Military & Defence Standards

MIL-STD-810G/H (Environmental Engineering) | MIL-STD-461G (EMI/EMC) | MIL-STD-202 (Electronic Components) | MIL-STD-883 (Microelectronics) | MIL-STD-704 (Aircraft Electric Power) | JSS 55555 (Indian Defence) | MIL-STD-1344 (Connectors) | DEF STAN 00-35

Aerospace & Aviation Standards

RTCA DO-160G/H (Airborne Equipment) | DO-254 (Airborne Electronic Hardware) | AS/EN 9100 | ECSS (European Space) | NASA Standards | ISRO Qualification Standards

International / Commercial Standards

IEC 60068 series | IEC 61000 series | IEC 60529 (IP Rating) | IEC 62368-1 | IEC 60950 | CISPR 11/22/32 | EN 55032/55035 | UL Standards | CE Marking | BIS/ISI | JEDEC | Telcordia | EN 61373 (Railway) | ISTA (Packaging) | ISO 16750 (Automotive)

Aerospace & Defence

Avionics, radar systems, communication equipment, missile electronics, UAV/drone components — MIL-STD, DO-160, JSS 55555 qualification.

Automotive & EV

ECUs, ADAS sensors, infotainment, EV battery management systems, charging stations — ISO 16750, LV 124, automotive EMC.

Railway & Metro

Signaling systems, traction electronics, on-board computers, passenger information systems — EN 50155, EN 61373, EN 50121.

Telecom & IoT

Routers, switches, base stations, Wi-Fi equipment, IoT sensors — TEC ER, MTCTE, FCC, CE, BIS certification.

Medical Devices

Powered medical equipment, patient monitors, diagnostic devices — IEC 60601 EMC & safety, environmental qualification.

Energy & Renewables

Solar inverters, wind turbine controllers, battery packs, smart grid equipment — IEC 62109, IEC 61215, reliability testing.

Elemental Impurity Studies

Testing per ICH Q3D guidelines using ICP-MS and ICP-OES for 24 elemental impurities in drug substances, drug products, and excipients. Risk assessment and method validation included.

Extractable & Leachable Studies (E&L)

Comprehensive E&L studies for container closure systems, packaging materials, medical devices, and drug delivery systems per USP <1663>, <1664>, <1665>.

Genotoxic Impurity Studies

Nitrosamine testing (NDMA, NDEA, NMBA, etc.), mutagenic impurity analysis per ICH M7 guidelines using GC-MS/MS and LC-MS/MS at ppm and ppb levels.

Dissolution Studies

USP Apparatus I-IV dissolution testing, dissolution method development and validation, comparative dissolution profiles (f1/f2), BCS-based biowaivers.

Stability Studies

ICH-compliant stability studies (long-term, accelerated, intermediate) in walk-in stability chambers (50,000L capacity). Photo-stability per ICH Q1B. In-use stability studies.

Method Development & Validation

Analytical method development and validation per ICH Q2(R1) for assay, related substances, dissolution, content uniformity, residual solvents.

Raw Material & Excipient Analysis

Complete pharmacopoeial testing (USP, EP, BP, IP, JP) of APIs, excipients, and raw materials including identification, assay, and impurity testing.

Pharmacopeia Compendial Testing

Testing per USP, EP, BP, IP, JP monographs for finished dosage forms — tablets, capsules, injectables, ointments, syrups, suspensions.

Solid State Characterization

Polymorphism screening, salt selection studies, particle size analysis, X-ray diffraction (XRD), DSC/TGA thermal analysis, moisture sorption studies.

Microbiological Testing

Microbial limit testing, sterility testing, bacterial endotoxin (LAL), antimicrobial effectiveness testing (AET), environmental monitoring, water testing per USP.

Packaging Material Testing

Container closure integrity testing (CCIT), extractable/leachable studies, physical & chemical testing of glass, plastic, rubber, and aluminum packaging per USP <661>, <381>.

Residual Solvent Analysis

ICH Q3C-compliant residual solvent testing by GC-HS with FID/ECD/TCD detectors for Class 1, 2, and 3 solvents.

🥗 Nutritional & Proximate Analysis

Complete nutritional profiling for labelling compliance — proteins, fats, carbohydrates, dietary fiber, energy value, moisture, ash, vitamins (A, D, E, K, B-complex, C), minerals (Ca, Fe, Zn, Na, K), amino acids, fatty acid profile. FSSAI label compliance for packaged foods.

🧫 Microbiological Testing

Total plate count (TPC), coliforms, E. coli, Salmonella, Listeria, Staphylococcus aureus, yeast & mold, Vibrio, Bacillus cereus, Clostridium perfringens. Pathogen detection by culture, ELISA, and real-time PCR methods.

🔬 Pesticide Residue Analysis

Multi-residue pesticide screening (400+ pesticides) by GC-MS/MS & LC-MS/MS. Organochlorine, organophosphorus, pyrethroid, neonicotinoid, and herbicide residues. Compliance with FSSAI MRL, EU MRL, Codex Alimentarius limits.

⚗️ Heavy Metals & Contaminants

Lead, cadmium, mercury, arsenic, tin, chromium by ICP-MS/ICP-OES/AAS. Melamine, 3-MCPD, acrylamide, polycyclic aromatic hydrocarbons (PAH), dioxins & PCBs testing. FSSAI & EU contaminant regulations compliance.

🍄 Mycotoxin Testing

Aflatoxins (B1, B2, G1, G2, M1), ochratoxin A, fumonisins, deoxynivalenol (DON), zearalenone, T-2/HT-2 toxins. Testing by HPLC, LC-MS/MS, ELISA for cereals, spices, dry fruits, animal feed.

🧬 Allergen Testing

Screening for major allergens — soya, milk (casein, beta-lactoglobulin), gluten, peanuts, tree nuts, fish, eggs, crustaceans, mustard, sesame using ELISA & real-time PCR. Gluten-free certification testing (<20 ppm).

🍯 Adulteration & Authenticity

Detection of adulteration in milk, ghee, honey, spices, edible oils. NMR-based honey authenticity (C13/C14 isotope ratio). Species identification by DNA barcoding. Vanaspati detection in ghee. Sudan dye in spices.

📅 Shelf Life & Stability Studies

Accelerated and real-time shelf life evaluation. Rancidity (peroxide value, FFA, TBA), microbial challenge testing, sensory evaluation, packaging compatibility, storage stability under FSSAI/USFDA guidelines.

🧴 Food Additives & Preservatives

Quantification of permitted & banned additives — benzoic acid, sorbic acid, sulfites, nitrates/nitrites, BHA/BHT, artificial sweeteners (saccharin, aspartame, sucralose), synthetic food colors per FSSAI limits.

🫒 Edible Oils & Fats Testing

Fatty acid composition (SFA, MUFA, PUFA, trans fat) by GC-FID, iodine value, saponification value, acid value, Reichert-Meissl, Polenske, Bellier Turbidity. Argemone oil detection, mineral oil contamination.

💧 Drinking Water (IS 10500)

Complete physical, chemical & bacteriological analysis per IS 10500 — pH, TDS, turbidity, hardness, chloride, fluoride, nitrate, iron, manganese, arsenic, lead, coliform, E. coli. BIS certification support.

🏭 Wastewater & Effluent Testing

BOD, COD, TSS, TDS, oil & grease, phenols, cyanide, heavy metals, phosphate, sulfate. Compliance with CPCB/SPCB discharge norms. Industrial effluent characterization per IS 3025.

🧊 Packaged Water (IS 14543 / IS 13428)

Complete testing for packaged drinking water & natural mineral water per BIS standards. BIS license support, batch testing, label compliance verification.

🏥 Pharmaceutical Water

Purified water, WFI (Water for Injection), process water testing — TOC, conductivity, endotoxin (LAL), microbial limits per USP/EP/IP pharmacopeial requirements.

⚗️ Chemical Analysis / Spectro Analysis

Complete chemical composition by OES (Optical Emission Spectrometry) for iron, copper, nickel, titanium, aluminum base alloys. Wet chemical analysis, ICP-OES for trace elements. Carbon-sulfur by LECO. Oxygen-nitrogen-hydrogen by inert gas fusion. PMI by portable XRF for on-site material verification.

🔬 Metallographic Examination (Micro/Macro)

Microstructure evaluation, grain size determination (ASTM E112), inclusion rating (ASTM E45), phase analysis, decarburization depth, case depth measurement, carbide morphology (SEP 1520). Macro examination for weld profile, heat-affected zone, flow lines, solidification structures, porosity, and fabrication defects.

🔍 SEM-EDS / SEM-EDAX Analysis

High-resolution scanning electron microscopy with energy dispersive X-ray analysis for microstructure imaging, elemental mapping, fracture surface analysis, inclusion identification, coating/plating evaluation, particulate analysis, and contamination assessment.

💥 Failure Analysis & Root Cause Investigation

Systematic root cause failure investigation (RCFI) combining visual, fractographic, metallographic, chemical, mechanical, and SEM-EDS analysis. Expertise in fatigue, stress corrosion cracking, hydrogen embrittlement, creep, erosion, overheating, and manufacturing defect failures. Comprehensive failure analysis reports with remediation recommendations.

🔗 Weld Testing & Qualification

Complete weld evaluation — macro/micro examination, weld profile assessment, penetration depth, fusion zone, HAZ characterization, weld defect identification. WPS/PQR support per ASME Section IX, AWS D1.1, EN ISO 15614. Welder qualification testing per IBR, ASME codes.

🧪 Corrosion Testing

Intergranular corrosion (IGC) per ASTM A262 (Practices A through E), pitting corrosion per ASTM G48, HIC (Hydrogen Induced Cracking) per NACE TM0284, SSC (Sulfide Stress Cracking) per NACE TM0177, stress corrosion cracking, salt spray per ASTM B117, Kesternich SO₂ test, humidity testing.

🌡️ Heat Treatment Verification

Case depth measurement (carburizing, nitriding, induction hardening), decarburization assessment, hardenability (Jominy end quench), transformation studies, age hardening verification, PWHT (Post Weld Heat Treatment) verification by hardness survey.

📊 Coating & Plating Analysis

Coating thickness by microscopic cross-section (ASTM B487), magnetic/eddy current methods. Coating adhesion, porosity, composition analysis. Galvanizing thickness per IS 2629/IS 4759. Chrome, zinc, nickel, cadmium plating evaluation.

💪 Mechanical Testing

Tensile strength, elongation at break, modulus (ASTM D638/ISO 527). Flexural strength & modulus (ASTM D790). Compression (ASTM D695). Izod/Charpy impact (ASTM D256/D6110). Tear resistance (ASTM D624). Peel strength & adhesion. Puncture resistance. Creep & stress relaxation.

🌡️ Thermal Analysis

DSC — melting point, glass transition (Tg), crystallinity, OIT (oxidation induction time). TGA — thermal decomposition, filler content, moisture/volatile content. HDT/Vicat softening point (ASTM D648/D1525). Coefficient of thermal expansion (CTE). Thermal conductivity.

⚗️ Chemical & Spectroscopic Analysis

FTIR — material identification, functional group analysis, contamination detection. Melt Flow Index/Rate (MFI/MFR per ASTM D1238). Density & specific gravity. Ash content. Moisture content (Karl Fischer). Extractables analysis. Solvent resistance. Chemical compatibility.

🔥 Flammability & Fire Testing

UL 94 vertical/horizontal flame rating (V-0, V-1, V-2, HB). Limiting Oxygen Index (LOI per ASTM D2863). Heat release rate (cone calorimeter). Smoke density. Fire resistance per building/railway standards (EN 45545). Glow wire test (IEC 60695).

☀️ Aging & Weathering Studies

UV weathering (QUV, Xenon arc per ASTM G154/G155). Thermal aging (oven aging at various temperatures). Ozone aging for rubber (ASTM D1149). Humidity aging. Accelerated weathering. Color stability (ΔE measurement). Yellowness index.

🔌 Electrical Properties

Dielectric strength (ASTM D149). Volume/surface resistivity (ASTM D257). Dielectric constant & dissipation factor. CTI (Comparative Tracking Index). Arc resistance. Electrical testing for insulation materials per IEC standards.

🛞 Rubber & Elastomer Testing

Shore A/D hardness (ASTM D2240). Tensile & elongation (ASTM D412). Compression set (ASTM D395). Abrasion resistance (DIN 53516). Rebound resilience. Mooney viscosity. Rheometer cure characteristics (MDR/ODR). Rubber-to-metal bond strength. Fluid resistance (ASTM D471).

🧱 Composite & FRP Testing

Interlaminar shear strength (ILSS). Fiber volume fraction. Void content. Laminate tensile/flexural/compression. Impact damage tolerance (CAI). Glass content (loss on ignition). Water absorption. Peel ply adhesion. GRP pipe testing (ring stiffness, liner pull-out).

🌿 Regulatory & Restricted Substance

RoHS compliance (Pb, Hg, Cd, Cr6+, PBB, PBDE). REACH SVHC screening. Food contact compliance (migration testing per EU/FDA/FSSAI). CPSIA (phthalates, lead). PAH screening. Formaldehyde emission. Proposition 65.

🧫 Sterility Testing

Direct inoculation and membrane filtration methods per USP <71>/EP 2.6.1/IP. Testing of APIs, finished dosage forms, biologics, ophthalmic, and sterile medical devices. Growth promotion and bacteriostasis/fungistasis validation.

🦠 Microbial Limit Testing (MLT)

Total Aerobic Microbial Count (TAMC) and Total Yeast & Mold Count (TYMC) per USP <61>. Specified microorganism testing per USP <62> — E. coli, Salmonella, Pseudomonas, S. aureus, Clostridia, Bile-tolerant gram-negative bacteria, Candida albicans.

💉 Bacterial Endotoxin Testing (BET)

Limulus Amoebocyte Lysate (LAL) testing — gel-clot, kinetic turbidimetric (KTA), and kinetic chromogenic methods per USP <85>. Parenteral drugs, WFI, medical devices, APIs. Endotoxin limits per USP/EP/IP.

🏭 Environmental Monitoring

Cleanroom classification and monitoring — viable (settle plates, active air sampling, contact plates, personnel monitoring) and non-viable particle counts. Trending, alert/action limit establishment per EU GMP Annex 1, USP <1116>.

💧 Water System Testing

Purified water, WFI, potable water microbial analysis. Heterotrophic plate count, coliform, E. coli, Pseudomonas. TOC (Total Organic Carbon) and conductivity. Bio-film assessment for water system qualification per USP <1231>.

🧴 Antimicrobial Effectiveness Test (AET)

Preservative efficacy testing per USP <51>/EP 5.1.3. Challenge organisms: E. coli, P. aeruginosa, S. aureus, C. albicans, A. brasiliensis. For pharmaceuticals, cosmetics, and personal care products.

🧹 Disinfectant Efficacy Validation

Evaluation of cleaning agents and disinfectants used in cleanroom environments. Suspension testing, carrier testing, and in-use dilution studies. Sporicidal, bactericidal, and fungicidal efficacy per EN standards.

🔬 Microbial Identification

Phenotypic (biochemical) and genotypic (16S/18S/ITS rRNA sequencing) identification of bacterial and fungal isolates. Environmental monitoring isolate characterization. Contamination source tracking.

🍔 Food Microbiology

Total plate count, coliforms, E. coli, Salmonella, Listeria monocytogenes, S. aureus, yeast & mold, Vibrio, Bacillus cereus, Clostridium per FSSAI/IS/ISO 4833/AOAC methods. Rapid pathogen detection by PCR.

🏥 Medical Device Bioburden

Bioburden estimation per ISO 11737-1. Sterility testing per ISO 11737-2. Bacterial endotoxin testing for medical devices. Cytotoxicity (ISO 10993-5). Support for sterilization validation (EO, gamma, steam).

📏 Tensile Testing

Room temperature and elevated temperature (up to 1000°C) tensile testing per ASTM E8/A370, IS 1608, EN 10002. Yield strength, UTS, elongation, reduction of area, proof stress (0.2% offset). Round bar, flat, sub-size, full-section specimens.

🔨 Impact Testing

Charpy V-notch (CVN) impact per ASTM E23/IS 1757 from ambient down to -196°C (cryogenic). Izod impact. DWTT (Drop Weight Nil-Ductility Temperature). Transition curve development. CTOD/fracture toughness per BS 7448/ASTM E1820.

💎 Hardness Testing

Rockwell (HRA, HRB, HRC per ASTM E18). Brinell (ASTM E10/IS 1500). Vickers macro & micro (ASTM E92/E384/IS 1501). Knoop. Portable hardness (Leeb/UCI). Hardness survey for PWHT verification, case depth mapping.

🔄 Fatigue & Fracture Mechanics

High-cycle fatigue (HCF), low-cycle fatigue (LCF), S-N curve generation. Fatigue crack growth rate (da/dN per ASTM E647). CTOD (crack tip opening displacement). J-integral (ASTM E1820). Stress rupture & creep testing at elevated temperatures.

🔧 Bend, Flattening & Forming Tests

Guided bend (face, root, side per ASTM E190/AWS D1.1). Free bend. Re-bend. Flattening test for tubes/pipes. Erichsen cupping test. Ring expansion/flange test per API/ASTM standards.

⚙️ Weld Mechanical Testing

All-weld-metal tensile. Cross-weld tensile. Nick-break. Macro/micro examination. HAZ hardness survey. Fillet weld break. Complete WPS/PQR qualification testing per ASME Section IX, AWS D1.1, EN ISO 15614, IBR.

🔊 Ultrasonic Testing (UT)

Manual UT, TOFD (Time of Flight Diffraction), Phased Array UT (PAUT) for weld inspection, flaw detection, wall thickness measurement. HTHA detection. In-service inspection of pressure vessels, pipelines, heat exchanger tubing per ASME Sec V, ASTM E797/E2375.

📸 Radiographic Testing (RT)

Industrial X-ray and gamma ray radiography for welds and castings. Digital radiography (DR) and computed radiography (CR). Film interpretation per ASME Sec V, ASTM E94, API 1104, EN 17636. Casting radiography per ASTM E446/E186.

🧲 Magnetic Particle Inspection (MPI)

Wet/dry, fluorescent/visible MPI for surface and near-surface defect detection. Bench-type and portable yoke/prods equipment. Per ASTM E709, ASME Sec V Art 7, EN ISO 9934. Demagnetization verification.

🎨 Liquid Penetrant Testing (LPT/DPT)

Fluorescent and visible penetrant inspection for surface-breaking defects in non-ferromagnetic materials. Per ASTM E165, ASME Sec V Art 6, EN ISO 3452. Sensitivity levels I through IV.

⚡ Eddy Current Testing (ECT)

Surface crack detection, conductivity measurement, coating/plating thickness, heat exchanger tube inspection. Multi-frequency and remote field ECT. Per ASTM E376, ASME Sec V Art 8.

📐 Positive Material Identification (PMI)

On-site alloy verification by portable XRF and OES. Grade confirmation for piping, fittings, flanges, valves, fasteners. Sorting of mixed material inventory. API RP 578 compliance.

📦 Compression & Stacking Testing

Box Compression Test (BCT) per ASTM D642/IS 7028. Edge crush test (ECT), ring crush test (RCT), flat crush test (FCT). Column crush. Stacking load simulation for warehouse storage. Corrugated board performance evaluation.

💥 Burst & Puncture Strength

Mullen burst (ASTM D774/IS 1060). Ball burst. Puncture resistance (ASTM D3420). Pin hole detection. Beach puncture for films. Burst pressure testing for blister packs & pouches.

🚚 ISTA Transit Simulation

Full ISTA test series (1A, 2A, 3A, 3B, 3E, 6-SAMSCLUB, 6-AMAZON). Random vibration simulation. Drop testing (free-fall, rotational, corner). Compression in transit. Shock & impact testing per ASTM D4169/D7386. Performance tested packaging certification.

🛡️ Barrier & Permeability Testing

Water vapor transmission rate (WVTR per ASTM E96/F1249). Oxygen transmission rate (OTR per ASTM D3985/F2622). CO₂ permeability. Moisture barrier evaluation for MAP packaging. Critical for food shelf-life and pharma stability.

🍽️ Migration & Food Contact Testing

Overall migration and specific migration testing per EU 10/2011, FSSAI, FDA 21 CFR 177. Simulants (water, acetic acid, ethanol, olive oil/iso-octane). Heavy metals in food contact materials per EU/FSSAI.

💊 Pharma Container Closure Integrity (CCIT)

Leak testing for vials, ampoules, syringes, bottles, blisters. Dye ingress, vacuum decay, headspace analysis. Container-closure extractable & leachable (E&L) studies per USP <1663>/<1664>. Glass container testing per USP <660>/<661>.

🔒 Seal Integrity & Peel Strength

Heat seal strength (ASTM F88). Peel adhesion (T-peel, 90°, 180°). Seal integrity by bubble emission/dye penetration (ASTM F2095/F1929). Hot tack. Seal through contamination. Lid peel for trays & cups.

🎞️ Film & Flexible Packaging

Tensile strength & elongation (ASTM D882). Tear resistance — Elmendorf (ASTM D1922) & Graves. Dart impact (ASTM D1709). COF — static & kinetic (ASTM D1894). Film thickness. Optical properties (haze, gloss, transparency). Shrink testing.

🏷️ Label & Printing Quality

Rub resistance (Sutherland rub tester). Print adhesion (tape test). Ink rub-off. Barcode verification (ISO 15416). Color consistency (spectrophotometer ΔE). Label adhesion. Scuff resistance.

🧬 Whole Genome Sequencing (WGS)

Complete de novo and resequencing of prokaryotic and eukaryotic genomes. SNP & InDel analysis, structural variant detection, coverage depth metrics. Hybrid assembly combining short reads (Illumina) and long reads (Nanopore). Applications: pathogen characterization, strain typing, phylogenetic analysis, crop genomics.

🔍 Whole Exome Sequencing (WES)

Targeted capture and sequencing of all protein-coding regions (exome). Ideal for identifying disease-associated variants, rare variant discovery, pharmacogenomics. High-depth coverage (>100X) for confident variant calling.

📊 RNA Sequencing (RNA-Seq)

Whole transcriptome profiling — mRNA-Seq, total RNA-Seq, small RNA-Seq, single-cell RNA-Seq. Differential gene expression analysis, splice variant discovery, novel transcript identification. Applications: drug target discovery, biomarker identification, disease mechanism studies.

🌍 Metagenomics / Microbiome

16S rRNA amplicon sequencing (V3-V4 regions) for bacterial community profiling. ITS sequencing for fungal diversity. Shotgun metagenomics for comprehensive taxonomic & functional profiling. Environmental samples (soil, water, sludge), gut microbiome, industrial microbiome.

🎯 Targeted Panel Sequencing

Custom gene panels and enrichment panels for focused sequencing of genes of interest. Cancer panels (hotspot mutations), pharmacogenomics panels, inherited disease panels, AMR (antimicrobial resistance) gene panels. High depth (>500X) for sensitive variant detection.

📖 Sanger Sequencing

Gold-standard capillary electrophoresis sequencing for fragment analysis, mutation confirmation, clone verification, plasmid sequencing. Fast turnaround for routine confirmatory sequencing. Forward & reverse reads, sequence assembly.

🧮 Bioinformatics & Data Analysis

End-to-end NGS data analysis pipelines — quality control, read mapping, variant calling (SNP/InDel/SV/CNV), gene expression quantification, pathway analysis, phylogenetics. Expertise in WGS, RNA-Seq, ChIP-Seq, metagenomics analysis using industry-standard tools. High-performance computing infrastructure.

🧪 Genotyping & Gene Expression

SNP genotyping, microsatellite analysis, MLST (Multi-Locus Sequence Typing), PFGE, RAPD, AFLP. Real-time PCR (qPCR) for quantitative gene expression, pathogen detection, GMO screening. TaqMan & SYBR Green assays.

🧫 Sample Preparation & QC

DNA/RNA extraction from diverse sample types — blood, tissue, FFPE, swabs, environmental samples, plant material. Automated nucleic acid extraction. QC by spectrophotometry (Nanodrop), fluorometry (Qubit), and electrophoresis (Bioanalyzer/TapeStation). Library preparation & QC.

⚗️ Analytical Method Development

Development of stability-indicating HPLC/UPLC methods for assay, related substances, dissolution, content uniformity. Method optimization for complex formulations (modified-release, fixed-dose combinations, biologics). ICH Q2(R1) compliant validation — specificity, linearity, accuracy, precision, range, robustness, LOD/LOQ.

🔥 Forced Degradation / Stress Studies

ICH Q1A/Q1B compliant stress testing under acid/base hydrolysis, oxidative (peroxide), thermal, photolytic, and humidity conditions. Degradation pathway elucidation. Mass balance studies. Peak purity verification. Demonstration of method specificity & stability-indicating nature.

🔬 Structural Characterization

Complete structural elucidation by NMR (¹H, ¹³C, DEPT, COSY, HSQC, HMBC), mass spectrometry (ESI-MS, HRMS, MS/MS fragmentation), FTIR, UV-Vis, elemental analysis. Polymorphism screening by XRPD, DSC, TGA, DVS. Salt/co-crystal screening.

🧪 Impurity Profiling & Identification

Process-related and degradation impurity identification and characterization by LC-MS/MS and NMR. Genotoxic impurity assessment per ICH M7. Nitrosamine risk assessment and testing (NDMA, NDEA, NMBA, NIPEA). Impurity fate & purge studies. Reference standard synthesis/qualification.

💊 Pre-formulation Studies

Physicochemical characterization — solubility (pH-solubility profile, kinetic solubility), pKa, logP/logD, hygroscopicity (DVS), crystallinity (XRPD), particle size (laser diffraction), morphology (SEM). Excipient compatibility studies by DSC/isothermal stress. BCS classification.

📋 Regulatory Filing Support

Preparation of analytical sections for CTD (Common Technical Document) — Module 3.2.S (Drug Substance) and Module 3.2.P (Drug Product). Specification setting per ICH Q6A/Q6B. Certificate of Analysis (CoA) generation. Analytical data compilation for IND, NDA, ANDA, DMF submissions.

🔄 Method Transfer & Lifecycle

Analytical method transfer from R&D to QC — protocol design, co-validation, equivalence testing per USP <1224>. Method lifecycle management per ICH Q14. Analytical Quality by Design (AQbD) with DoE optimization. Real-time method performance monitoring.

🏭 Process Chemistry Support

In-process control (IPC) method development. Reaction monitoring by HPLC/GC. Residual solvent analysis (ICH Q3C). Residual catalyst/metal testing by ICP-MS. Chiral purity by chiral HPLC/SFC. Polymorphic form control during scale-up.